slurry coating
英 [ˈslʌri ˈkəʊtɪŋ]
美 [ˈslɜːri ˈkoʊtɪŋ]
网络 浆料涂覆法; 粉浆涂层
双语例句
- After the surface treatment, the slurry coating is uniform, the recoverability of the templates is improved, and the slurry loading on the templates increases greatly.
结果表明，表面处理以后，有机模板更容易被水基浆料均匀涂覆，且回弹力得到显著增强，涂覆量也得到显著提高。 - Applicable to various electronic components, production of the slurry coating electrodes with good screen printing performance, electrical performance and adhesion.
适用于各种电子元器件，制作被覆电极该浆料具有良好的丝网印刷性能、电性能及附着力。 - Study on Slurry Abrasive Characteristics of Laser Cladding Coating and Its Application
激光熔覆涂层的浆体磨损特性及其应用研究 - Ultrafine powder is mainly used for preparation of gold conductor paste, slurry and gas sensor gold bonding gold paste welding can also be used for other materials for coating the conductive phase.
超细金粉主要用于配制金导体浆料、金粘接浆料和气敏元件焊接金浆料，也可用于其它材料作涂层的导电相。 - The coating of the slurry composition, viscosity, coating means, sintering temperature and coated technological process which is applied to different parts are studied.
重点论述了涂层在发动机不同零件上的浆料成份及粘度、涂覆方法、烧结温度和工艺过程。 - The static conducting slurry was then compounded with polyacrylic emulsion for coating preparation and static conducting performance of the film was investigated.
并将导静电浆料与聚丙烯酸酯类乳液复合配制涂料，考察涂膜的导静电性能。 - Study of slurry erosion resistance of Cu-base and Ni-base flame spray welding coating
Cu基、Ni基喷焊层材料的浆体冲蚀性能研究 - A Preliminary Study on the Static Shear Stress of Debris Flow Slurry INVESTIGATION ON THE COATING'S STATIC SHEAR STRESS AND SURFACE TENSION
试论泥石流浆体的静切力涂料静切力及表面张力的研究 - Studies of modified si-cr-ti slurry fusion coating on 103 niobium alloys
C－103铌合金上Si－Cr－Ti料浆熔烧涂层的改性研究 - According to the analysis of wearing curve by tests and wear topography by SEM, slurry erosion wear mechanism of modified epoxy adhesive coating was discussed.
浆体冲蚀磨损机制的分析讨论是结合磨损试验获得各种情况下的磨损曲线与扫描电镜观察到的磨损形貌进行分析的。 - In order to produce dry sanding paper applied to soft materials, the slurry coating was prepared by smearing unblocked materials according to the phase change principle of endothermal agents.
为研制适用于软质材料磨削的干磨砂纸，通过涂覆特殊的防堵塞材料，利用吸热剂的相转变原理，研制了干磨砂纸超涂层浆料。 - The subject has prepared anti-oxidation coating carbonaceous material by stuff slurry way, and emphatically discussed high temperature anti-oxidation coating composition of SiO_2 system, whose preparation, formation and anti-oxidation effect were also studied systematically.
本研究采用料浆法制备含碳材料的抗氧化涂层，重点探讨了SiO2体系高温抗氧化涂层的组成，并对其制备方法、形成机理及其抗氧化效果进行系统研究。 - Fabrication of hard cladding materials using slurry coating method
浆料涂层法制备钢用硬质覆层材料 - The protective SiO_2-based ceramic coating was prepared on stainless steel by slurry method. The corrosion resistance of the obtained ceramic coating was studied by the measurement of immersion method, salt spray corrosion test method and anodic polarization curve method.
采用料浆法在不锈钢基体上制备具有保护性的SiO2基陶瓷涂层，通过浸泡法、盐雾腐蚀试验以及阳极极化曲线试验，研究了陶瓷涂层的耐蚀性。 - An anode-supported single-chamber solid oxide fuel cell ( SC-SOFC) with dense yttria-stabilized zirconia film as the electrolyte was fabricated by the slurry spin coating technique.
使用浆料旋涂法制备了致密氧化钇稳定的氧化锆电解质薄膜，进而组装成阳极支撑型单气室固体氧化物燃料电池。 - The results shown that the slurry erosion wear of adhesive coating is composed of adhesive wear and antiwear filler wear.
结果表明，这种涂层的冲蚀磨损是由粘结剂的磨损和抗磨填料的磨损所组成； - The influence of technology condition which include ceramic composition, slurry technology, sintering technology, coating materials and coating technology on the humidity resistance of ZnO varistor is studied by adopting high pressure vapour condition.
采用蒸煮法研究了ZnO压敏电阻器瓷料配方、料浆工艺、烧结工艺、包封材料及包封工艺对其耐潮湿性能的影响。 - The slurry erosion behaviors of ceramic particles reinforced epoxy matrix composite coating were explored using a self-designed slurry pot tester.
首次采用自制的模拟罐式泥浆冲蚀试验机对环氧基复合涂料的泥浆冲蚀磨损性能进行了研究，通过调整固化剂聚酰胺与环氧的质量比，设计出最佳的基体组成； - According to various deteriorations and early destructions of high grade highway asphalt pavement, the paper analyzes the types and causes of deteriorations and presented some preventive maintenance technology, such as crack mending and slurry concrete seal coating.
针对高等级公路沥青路面出现的各种破损和早期病害，分析了破损类型及其产生原因，并且提出了裂缝修补、稀浆封层等沥青路面的预防性养护技术。 - RDX molding powder is prepared by water slurry. The effect of technical process on the coating RDX with polymer solution is studied.
采用溶液水悬浮法制备***（RDX）造型粉，探讨了造粒工艺条件对某高聚物溶液包覆RDX工艺的影响。 - SIK waterproofing slurry is a double component waterproofing coating, which has polymer emulsion and inorganic powder as main ingredients.
SIK防水浆料是以聚合物乳液和无机粉料为主料配制而成的双组分防水涂料。 - Quality Problems Analysis and Strategies in Slurry Coating Construction
稀浆封层施工出现质量问题分析及其解决对策 - Si/ SiC coating was prepared on C/ SiC CMC by methods of slurry precoating-reaction sinter, the effect of raw material and process parameters on the properties of coating was studied;
采用新的泥浆预涂层-反应烧结工艺在C/SiC复合材料表面制备Si/SiC致密涂层，重点研究了原材料、工艺条件对涂层性能的影响； - In a word, the structure and performance of the single cell prepared by magnetron sputtering are better than those prepared by slurry spin coating.
相比较而言，磁控溅射法制备的单电池的结构和性能优于浆料旋涂法制备的单电池。 - Addition of small amount of non-ionic surfactants improves the thixotropism and stability of alumina slurry, and the coating rate of washcoat, in which PEG-2000 has the best effect. 2.
非离子型表面活性剂的添加能够改善氧化铝浆料的触变性，提高浆料的稳定性以及涂层的上载率，其中PEG-2000的效果最好。